- Speakers /
- Speakers /
- Rond: 16 tot 20 cm /
-
JL AUDIO M650-CCX-SG-WH
16.5 cm 2 weg Marine Speakers, Witte Sport Grille
Purpose-engineered and built for real marine duty, M-Series coaxial systems deliver maximum audio performance in any open-air boating environment.
This special, narrow-flange, 6.5-inch coaxial speaker fits in spaces where a conventional marine 6.5-inch speaker will not. It features an outer frame diameter of only 6.55 in. (166 mm), yet still maintains the same cone area as conventional, wide-flange designs. (If you need a standard, wide-flange marine 6.5-inch coaxial, select the MX650-CCX, instead.)
The long excursion woofer design and excellent power handling make your music come through loud and clear at speed, or at anchor. The woofer design is optimized to operate with a large volume of air behind it (at least 2 cu. ft. / 57 l). Operating this coaxial system in less space will compromise its low frequency performance.
A 1-inch pure silk dome tweeter, specially treated to withstand the marine environment, handles the high-frequency duties. Silk has been chosen for its lightness, excellent damping properties and smooth response characteristics. You will appreciate the clean, articulate high-frequency response of the M-Series dome tweeter, especially at higher volume levels.
A true 2-way passive crossover network is sealed in a protective capsule and mounted to the woofer's frame so that it does not require additional mounting provisions.
Although M650-CCX Coaxial Systems can be used with as little as 25 W per channel, for best audio performance we recommend amplifiers capable of between 75-150 W of continuous power per channel.
Sold as a pair.
Specificaties:Continuous Power Handling (RMS) | 75 W |
Peak Music Power | 225 W |
Recommended RMS Amplifier Power (per Ch.) | 25 - 150 W |
System Efficiency | 89.5 dB @ 1 W / 1 m |
System Nominal Impedance | 4 Ω |
System Frequency Response | 55 Hz - 25 KHz ± 3 dB |
Frame Outer Diameter (A) | 6.55 in / 166 mm |
Bolt Hole Circle Diameter (B) | 5.79 in / 147 mm |
Motor Overmold Outer Diameter (C) | 3.75 in / 95 mm |
Frontal Grille Protrusion* (D) | 0.91 in / 23 mm |
Mounting Hole Diameter (E) | 5.00 - 5.25 in / 127 - 133 mm |
Mounting Depth (F) | 2.95 in / 75 mm |